Look up what your inverter, microinverter or monitoring app is telling you. Each page explains one fault in plain English, using the manufacturer’s own documentation: what it means, which equipment shows it, what’s safe to check, and when it needs a licensed electrician.
Code still showing, or not sure what it means? Renew Solar Services diagnoses and repairs inverters, microinverters and monitoring systems throughout Nassau and Suffolk County.
Search by code or message
| Manufacturer | Equipment | Code / message | What it means |
|---|---|---|---|
| SolarEdge | Single-phase inverters (LCD and SetApp) | Isolation Fault — Error 25, 2x19, 18x86 | The array isn’t properly isolated from ground; a safety fault for a qualified technician |
| Enphase | IQ8 microinverters | DC Resistance Low – Power Off (solid red LED) | A microinverter found low resistance to ground and shut off; cleared only with installer tools |
| SunPower | PVS5 / PVS6 monitoring | PVS6 / PVS5 offline — Internet Communication Down | Usually the monitoring unit has lost its connection; the panels may still be producing |
| Enphase | M215 / M250 microinverters | M215 / M250 model guide | Problems, replacement units and upgrade options for older Enphase systems |
No match yet. Call (631) 500-5115 and tell us exactly what your display or app shows.
Browse by manufacturer
Before you look anything up
- Write down exactly what you see — the code, the message, the LED colors, and when it started.
- The same number can mean different things on different equipment or firmware. Each page lists the equipment it applies to.
- Don’t open equipment or touch wiring. Solar systems carry high DC voltages. The checks on these pages are limited to what the manufacturer tells owners they can safely do.
Renew Solar Services is authorized to service and repair SolarEdge and Enphase systems, and we service legacy SunPower and other brands across Nassau and Suffolk County. If your code isn’t listed yet, call (631) 500-5115.
